Leave Your Message

Skid Resistant Waterproof Floor Protection Roll

We're JINHAOCHENG, the source manufacturer of skid-resistant, waterproof floor protection rolls — a nonwoven felt factory in Huizhou, Guangdong with 21 years of experience, a 26,000 m² plant, 15 automated lines and about 10,000 tons of annual capacity. This roll isn't a sheet of film. On top, a needle-punched felt face soaks up water, oil and dirt for grip; underneath, a waterproof backer stops leaks. The two are laminated firmly together: people don't slip on it, liquids don't reach your floor, and it rolls back up for reuse.

As a factory, we make it all to your spec — weight (90–2000 gsm), thickness (1–30 mm), width (up to 5 m), length (1–1000 m), lamination and printing. Send over your specs and volumes; samples are free from stock, so check the material before we talk MOQ and wholesale pricing.

    Skid-resistant, waterproof floor protection is a temporary, re-laminatable covering that keeps workers from slipping on wet surfaces while stopping water and liquids from reaching the finished floor. A needle-punched felt top soaks up water, oil and dirt for grip; a waterproof backer underneath stops leaks; the two are firmly laminated together to survive reuse.)

    Why Skid & Waterproof Protection Matters on the Job

    Wet, slippery surfaces and spills are two of the biggest sources of accidents and rework on a job. Skid-resistant, waterproof floor protection is a temporary covering laid over a finished floor to handle both at once.

    On job sites, in garages, workshops and renovation projects, two things are feared most: someone slipping, and the floor getting ruined. Wet surfaces account for a high share of slips and falls; and during renovation or painting, water, paint, coolant and mud that seep into a finished floor can leave stains — or force you to tear it out and redo it. That's why protection has to handle skid resistance and waterproofing together. This roll does both: it grips on top and seals below.

    Drain the Wet, Hold the Water — Felt Top + Waterproof Backer

    Most items out there are plastic film with a skid-resistant backing, or film with a sprayed-on adhesive backer. This one is a composite — two layers, each with a job to do.

    Most products of this kind are plastic film with a skid-resistant backing, or film held down by sprayed-on adhesive. Ours is a composite, and each of the two layers has a job:

    • Felt face up — soaks up water, oil and mud: liquid lands and gets absorbed before puddles form underfoot, while the felt also cushions, resists wear and guards against scratches.

    • Waterproof backer down — seals it off: water, oil, coolant, mud and slush stay off the floor; they can't get through.

    • Firm lamination, no delamination: the felt and backer are bonded through lamination, so repeated water and oil exposure plus regular cleaning and handling won't separate them — many pads come apart over time, and that's the problem we focus on solving.

    • Reusable: more durable means more reuses, which means a lower cost per use than single-use film.

    • Multi-material lamination: the polyester base can be laminated with PE/TPE/rubber/PVC/PP/TPU/EVA film as needed — waterproof, oil-resistant, moisture-wicking and flame-retardant options on request.

    Durable Anti-Skid Floor Protection
    Non-Slip Construction Floor Protection
    Skid Resistant Waterproof Floor Protection Roll

    How It Protects, Drains & Stays Put

    This roll works as “divide and block”: the felt face soaks up liquid for grip while the waterproof backer underneath stops it from reaching the floor, and firm lamination keeps it reusable.

    The logic is “divide and block.” Liquid lands, the felt face soaks it up and spreads it out, so it doesn't turn slippery underfoot right away; what's left is caught by the waterproof backer underneath, which won't let it reach the floor. The two layers are laminated into one piece, so it stays together through many uses. To install, unroll it, cut it to shape with a utility knife, and it's down — no extra steps. It follows curved floors, wall edges and stairs as you lay it. When the job is done, roll it up, rinse and dry it, and use it again on the next one.

    Specifications & Customization

    These composite rolls are made to order: weight 90–2000 gsm, thickness 1–30 mm, width up to 5 m, length 1–1000 m, laminatable with PE/TPE and more.For custom, wholesale and project-based procurement, explore our custom temporary floor protection solutions.

    Skid-resistant, waterproof composite rolls, made to order:For projects requiring stronger impact resistance and repeated use, compare our heavy-duty floor protection for demanding projects.

    • Weight: 90–2000 gsm (0.02–0.41 lb/ft²)

    • Thickness: heavy-duty 1–30 mm, to spec

    • Width: up to 5 m

    • Length: 1–1000 m to spec (roll diameter / per-roll length on request)

    • Material / construction: needle-punched felt face + waterproof backer, firmly laminated; laminatable with PE/TPE/rubber/PVC/PP/TPU/EVA film

    • Color / pattern: dyed, solid or to pattern (printing scope to confirm)

    • Features: waterproof, oil-resistant, leak-proof, skid-resistant, shrink- and pill-resistant, wrinkle-resistant, UV-resistant, mildew-proof, abrasion-resistant, moisture-wicking; flame-retardant optional

    • Packaging: paper tube + color label + plastic bag, or custom box

    • OEM: logo printing, roll label, packaging and construction all customizable

    Send us your specs, volumes and lead-time window for MOQ and wholesale pricing, and we'll send samples first (MOQ tiers and whether add-on fees are published — to confirm).

    Where It's Used

    Used on renovation sites, garages, workshops, paint work, commercial makeovers and industrial plants — anywhere a finished floor needs both grip and water protection.For painting and spray work, review our floor protection for painting contractors and private-label buyers.

    • Construction and renovation: living rooms, corridors, lobbies, stairs — wet work and dusty grinding

    • Garages, workshops and auto repair: oil, coolant, metal shavings, wheel-tracked mud

    • Painting and spray work: drips, solvent, overspray

    • Commercial makeovers: hotel floors, offices, retail stores

    • Industrial plants, warehousing, data centers: heavy loads alongside high foot traffic

    • Other felt-friendly settings: hospitals, agriculture, home decor, automotive — nonwoven's wear-resistance and softness carry over (marine / outdoor available per project)

    Waterproof Floor Protection Roll
    anti-slip surface protection
    Non-Slip Surface Protection Film

    Factory · OEM · Wholesale

    A 26,000 m² source factory with 15 lines and about 10,000 tons of annual capacity — weight, thickness, width, length, lamination, printing and packaging all made to spec, with OEM support.

    • Source factory: 26,000 m², 15 automated lines, about 10,000 tons of annual capacity, from raw material to finished product, serving customers in 50+ countries

    • Made to spec: weight, thickness, width, length, lamination, printing and packaging all follow your print

    • Credentials and tests: OEKO-TEX Standard 100, ISO9001/13485/14001/45001, IATF16949, GRS, BSCI, REACH, RoHS; UL94 flame retardancy plus ASTM flammability, BS5852 and US CA117 test reports available on request

    • Private label / OEM: logo, roll label, packaging and design all done — free design and free samples, better pricing at volume

    • Delivery: typically 7–15 days after payment, adjusted by order size (lead-time wording to confirm)

    Send us your specs, volumes and lead-time window — we'll propose a solution and ship samples.

    floor protection factory
    floor protection sample room
    floor protection workshop

    How to Choose the Right Protection

    Pick by three things — how wet and slippery the site is, how much the finished floor fears leaks, and how often you'll reuse it.

    • Sites with heavy wetness and slips: go with a heavier felt face that soaks up water and grips

    • Finished floors that fear leaks (wood, stone, tile): choose a waterproof-backer composite with firm lamination

    • Frequent heavy loads and long-term coverage: choose a thicker, tougher construction

    • Private label / wholesale: OEM printing plus custom packaging — better pricing at volume

    Not sure? Send us the application — we'll help you pick, quote and send samples.

    Usage Notes

    Lay it on a clean, level, dry surface and keep it off newly poured, not-yet-cured floors; rinse the roll clean after it picks up oil.

    • Lay on a clean, level, dry surface; rinse the roll or swap it out as it picks up oil

    • Do not lay on freshly poured, not-yet-cured surfaces (such as still-wet new concrete) — wait until they've cured

    • For heavy solvent or oil exposure, confirm the matching lamination and resistance with us first

    • Match coverage to your schedule; for long-term or high-frequency use, ask about the right series

    FAQ

    The questions buyers ask most — what it is, how it differs from plastic film, whether it delaminates, how big it can be made, and what certifications are available.

    What is skid-resistant, waterproof floor protection?

    A temporary covering laid over a finished floor to keep people from slipping and keep liquids from reaching the floor: it soaks up water and oil for grip on top, and seals against leaks below.

    How is it different from regular PE film or plastic protection?

    Plastic film just covers the floor — it gets slippery when wet and tears easily. Ours is a felt + waterproof-backer composite: it soaks up liquid and grips on top, seals below, and stays firmly laminated so it can be reused.

    Will it delaminate?

    That's the problem we focus on solving: the felt and waterproof backer are bonded through lamination, so repeated water and oil exposure plus regular cleaning and handling won't separate them. Durable means more reuses.

    How big can it be made?

    Weight 90–2000 gsm, thickness 1–30 mm, width up to 5 m, length 1–1000 m; lamination, printing and packaging all to order.

    Can you provide samples and certifications?

    Free in-stock samples, so you can check first; certifications include OEKO-TEX/ISO/GRS/REACH/RoHS plus UL94 flame retardancy and ASTM flammability, BS5852 and US CA117 test reports (on request).

    Explore More Nonwoven Solutions

    Explore JINHAOCHENG’s broader range of nonwoven materials and finished-product solutions for construction, industrial, household and specialized applications. Custom specifications, OEM/ODM development and wholesale supply are available for qualified projects.

    Get Factory-Direct Pricing & Free Samples

    Need a different material, specification or packaging format? Contact JINHAOCHENG for custom development, samples and wholesale project supply.

    Request a Quote →

    Explore More Nonwoven Solutions

    Explore JINHAOCHENG’s broader range of nonwoven materials and finished-product solutions for construction, industrial, household and specialized applications. Custom specifications, OEM/ODM development and wholesale supply are available for qualified projects.